Specification Sheet

3/8"
Notes
Technical Information
Measure your actual product for rough-in details.
All product dimensions are nominal.
Install this product according to the installation
instructions.
Drop-inInstallation:
EndDrain location:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
41" x 20-1/2" (1041 mm x 521 mm)Basin area, bottom:
53-1/2" x 32-1/8" (1359 mm x 816 mm)Basin area, top:
80 lbs (36.3 kg)Weight:
If installing a rim-mount faucet, make sure there
is no interference with drain overflow before
35 lbs/ft² (170.9 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
drilling any holes. Consult local and national
57 gal (215.8 L)Water capacity:
codes for minimum air gap requirements if
installing a spout on the faucet deck.
Drop-in, 58-1/2" x 40-1/2" (1486 mm x
1029 mm)
Cutout:
3-1/4" (83 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 04:35
Windward
®
5' Bath
K-1113