Specification

Technical Information
Fixture*: basin area top area weight
Bathing well 43″ (1092
mm) x 20-1/2″
(521 mm)
53-1/2″ (1359
mm) x 32-1/8″
(816 mm)
80 lbs
(36 kg)
water depth capacity
To overflow 15″ (381 mm) 57 gal (215.9 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions:
58-1/2″ (1486 mm) x 40-1/2″ (1029 mm)
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
35 lbs/square foot (169 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no
interference with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
2-7/8"
(73 mm)
3"
(76 mm)
Recommended faucet area
1-1/2" OD
No change in measurements if connected with
drain illustrated. (K-11677)
1-1/4"
(32 mm)
1-1/2"
(38 mm)
Tile Flange
Detail
Drop-In
Rim Detail
1-1/2"
(38 mm)
19-1/2"
(495 mm)
3-1/8"
(79 mm)
3-1/2"
(89 mm)
21"
(533 mm)
10-13/16"
(275 mm)
60" (1524 mm)
42" (1067 mm)
3/8" (10 mm)
Product Diagram
WINDWARDTM
WINDWARDTM ACRYLIC BATH
Page2of2
1047215-4-
D