Rough-In Guide

Product Information
Applicable product:
Bath – drop-in, rim style K-1115
Bath – drop-in, 4-side integral flange K-1115-F
Fixture*:
Basin area:
Bathing well, bottom 55″ (139.7 cm) x 23-1/4″ (59.1
cm)
Bathing well, top 64″ (162.6 cm) x 32″ (81.3 cm)
Weight 100 lbs (45 kg)
To overflow:
Water depth 15″ (38.1 cm)
Capacity 78.5 gal (297 L)
* Approximate measurements for comparison only.
Drop-in cut-out
dimensions:
70-1/2″ (179.1 cm) x 40-1/2″
(102.9 cm)
Recommended accessories:
Clearflo pop-up drain OR K-7166-AF
Swiftflo pop-up drain K-11677
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
38 lbs/square foot (186 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no
interference with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Fixtures conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
72" (182.9 cm)
42" (106.7 cm)
1-1/2" OD
3/8" (1 cm)
21"
(53.3 cm)
3-1/2"
(8.9 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Recommended faucet area
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
19-1/2"
(49.5 cm)
1-1/2"
(3.8 cm)
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
1-1/4"
(3.2 cm)
Tile Flange
Detail
11-1/16" (28.1 cm)
3-3/4"
(9.5 cm)
Roughing-In
K-1115, K-1115-F
WINDWARD
TM
BATH
WINDWARDTM BATH
1047226-1-
C