Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
45-5/16″ (1151 mm) x 25-9/16″ (649 mm)
Basin area,
top
52-9/16″ (1335 mm) x 28-1/16″ (713 mm)
Weight 70 lbs (32 kg)
To overflow:
Water depth 12-11/16″ (322 mm)
Capacity 55.6 gal (210.5 L)
*Approximate measurements for comparison only.
Heater: W V HZ A
65 120 60 .5
Installation Notes
Install this product according to the installation guide.
Locate a GFCI-protected 120 V, 15 A, grounded electrical
outlet within 24″ (610 mm) of the bath junction box.
40″ (1016 mm) cable is included.
Floor support under the bath must provide for a minimum of
45 lbs/square foot (219.7 kg/square meter) loading.
Integral Flange Detail
1-1/4"
(32 mm)
3/8"
(10 mm) R.
1-1/4"
(32 mm)
No change in measurements if connected
with drain illustrated. (K-7213)
17"
(432 mm)
18-1/4"
(464 mm)
2-1/2"
(64 mm)
1/2" (13 mm)
3"
(76 mm)
2-7/8" (73 mm)
30"
(762 mm)
9-3/4" (248 mm)
60" (1524 mm)
16-7/8"
(429 mm)
36"
(914 mm)
1-1/2" Bath Drain
Lumbar
Angle
25˚
Access Panel
20" (508 mm) L x 15" (381 mm) H Min
Product Diagram
EXPANSE
®
EXPANSE
®
5’ CURVED APRON BATH WITH BASKTM HEATED SURFACE
Page2of2
1201642-4-
B