Specification

Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
42-7/16″ (1078 mm) x 20″ (508 mm)
Basin area,
top
54-5/16″ (1380 mm) x 24-1/4″ (616 mm)
Weight 75 lbs (34 kg)
To overflow:
Water depth 15-1/8″ (384 mm)
Capacity 59.8 gal (226 L)
* Approximate measurements for comparison only.
Heater: W V HZ A
65 120 60 1.1
Installation Notes
Install this product according to the installation guide.
Locate the bath within 24” (610 mm) of a GFCI-protected,
120 V, 15 A, grounded electrical outlet.
Floor support under bath must provide for a minimum of 42
lbs/square foot (202 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
60" (1524 mm)
20-1/4"
(514 mm)
30"
(762 mm)
3-11/16"
(94 mm)
15"
(381 mm)
12-5/8"
(321 mm)
13/16"
(21 mm)
4-1/8"
(105 mm)
No change in measurement if connected with
drain illustrated. (K-7272)
1-1/2" Bath Drain
1-1/4"
(32 mm)
Tile Flange
Detail
19"
(483 mm)
Lumbar
Angle
40˚
Access Panel
30" (762 mm) L x
15" (381 mm) H Min
15-3/4"
(400 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
5’ BATH WITH BASKTM HEATED SURFACE AND INTEGRAL FLANGE
Page2of2
1196034-4-
A