Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
45-1/8″ (1146 mm) x 19-11/16″ (500 mm)
Basin area,
top
52-3/4″ (1340 mm) x 25-5/16″ (643 mm)
Weight 100 lbs (45.4 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Blower
motor:
Heater V Hz A
300 W 120 60 5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor: 120 V, 15 A, 60 Hz
Blower motor is supplied with a 24″ (610 mm)
grounding-type plug-in cord.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 46 lbs/square foot (223 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
1/2" (13 mm) R.
1-1/2"
Bath Drain
60" (1524 mm)
3/4" (19 mm)
19"
(483 mm)
32"
(813 mm)
2-1/2"
(64 mm)
16"
(406 mm)
11-1/4"
(286 mm)
Integral Flange
Detail
1-1/4"
(32 mm)
No change in measurements if connected with
drain illustrated. (K-7271 or K-7272)
11-1/4"
(286 mm)
3/4" (19 mm)
4-1/8"
(105 mm)
1-1/4"
(32 mm)
Product Diagram
ARCHERTM
ARCHERTM 5’ BUBBLEMASSAGETM BATH WITH AIRJETS
Page2of2
1071361-4-
E