Specification

Technical Information
Fixture*:
Bathing well
Basin area, bottom 45-1/8″ (1146 mm) x 19-11/16″
(500 mm)
Basin area, top 52-3/4″ (1340 mm) x 25-5/16″
(643 mm)
Weight 110 lbs (50 kg)
To overflow
Water depth 15″ (381 mm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (1486 mm) x 30-1/2″ (775 mm)
Pump: V Hz A
1-speed 120 60 7
Heater: kW V Hz A
1.5 120 60 12.5
Pump is supplied with 24″ (610 mm) grounding-type
plug-in cord.
Required Electrical Service
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 46 lbs/square foot (227 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
32" (813 mm)
60" (1524 mm)
1-1/2"
Bath Drain
3/4" (19 mm)
16"
(406 mm)
1-1/4"
(32 mm)
2-1/2"
(64 mm)
19"
(483 mm)
Drop-in Rim Detail
No change in measurements if connected
with drain illustrated. (K-7272)
11-1/4"
(286 mm)
Pump/Control Access
20" (508 mm) W x 15" (381 mm) H
1-1/2"
(38 mm)
4-1/8"
(105 mm)
Product Diagram
ARCHERTM
ARCHERTM 5’ BATH WHIRLPOOL WITH HEATER
Page2of2
1071357-4-
F