Specification

Technical Information
Fixture*:
Bathing well
Basin area bottom 45-1/8″ (114.6 cm) x 19-11/16″
(50 cm)
Basin area top 52-3/4″ (134 cm) x 25-5/16″
(64.3 cm)
Weight 140 lbs (63.5 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Pump: Hp V Hz A
1-speed 1.25 120 60 7
Heater: kW V Hz A
1.5 120 60 12.5
Required Electrical Service
(2 required)
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 49 lbs/square foot (240 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
No change in measurements if connected
with drain illustrated. (K-7272)
1/2" (1.3 cm) R.
1-1/2" OD
60" (152.4 cm)
Integral Flange
Detail
1-1/4"
(3.2 cm)
16"
(40.6 cm)
2-1/2"
(6.4 cm)
3/4" (1.9 cm)
11-1/4"
(28.6 cm)
19"
(48.3 cm)
1-1/4"
(3.2 cm)
32" (81.3 cm)
Product Diagram
ARCHERTM
ARCHERTM 5’ (1.5 m) BATH WHIRLPOOL WITH HEATER
Page2of2
1071359-4-
B