Specification

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 45-1/8″ (1146 mm) x 19-11/16″
(500 mm)
Basin area, top 52-3/4″ (1340 mm) x 25-5/16″
(643 mm)
Weight 135 lbs (61.2 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Pump is supplied with 24″ (610 mm) grounding-type
plug-in cord.
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 49 lbs/square foot (240 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
1/2" (13 mm) R.
1-1/2"
Bath Drain
60" (1524 mm)
32" (813 mm)
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/4"
(32 mm)
Integral Flange
Detail
19"
(483 mm)
3/4"
(19 mm)
2-1/2"
(64 mm)
11-1/4"
(286 mm)
1-1/4"
(32 mm)
16"
(406 mm)
4-1/8"
(105 mm)
Product Diagram
ARCHERTM
ARCHERTM 5’ BATH WHIRLPOOL WITH INTEGRAL APRON
Page2of2
1071358-4-
E