Homeowner's Guide

Heated Surface
NOTICE: The heated surface will remain on until it is manually turned OFF by touching the illuminated
[Heated Surface] icon.
Turn Heated Surface ON
NOTE: The heater will turn on at low heat or the last selected temperature setting.
To turn lumbar heat ON, touch the [Heated Surface] icon located on the right side of the interface
screen. The icon and brackets will illuminate in the center of the screen.
Adjust Temperature Setting
NOTE: After 60 minutes of inactivity, the heater will automatically reset to low heat if the temperature
was set to medium or high.
The [Heated Surface] icon consists of three individual flames. Illumination of one or more flames
indicates which temperature setting is activated.
Touch the minus [-] icon to decrease temperature, or the plus [+] icon to increase temperature. The
individual flames will illuminate or darken to signify the selected temperature setting.
Low heat: bottom flame is illuminated.
Medium heat: bottom and middle flame are illuminated.
High heat: all three flames are illuminated.
Turn Heated Surface OFF
Touch the illuminated [Heated Surface] icon to turn the lumbar heat OFF. The icon and brackets will
no longer be illuminated and the minus [-] and plus [+] icons will disappear.
Aux
Home
Medium Heat High Heat Heat OFF
heated surface
heated surface heated surface heated surface
Experience
Low Heat
Chromatherapy
(If Equipped)
Heated Surface
1212240-5-B 10 Kohler Co.