Homeowner's Guide

IMPORTANT INSTRUCTIONS
WARNING: When using electrical products, basic precautions should always be followed,
including the following:
WARNING: Risk of electric shock. Connect only to a circuit protected by a Ground-Fault
Circuit-Interrupter (GFCI)*. Grounding is required. The unit should be installed and grounded by a
qualified service representative.
WARNING: Risk of electric shock. A qualified electrician should route all electrical wiring.
WARNING: Risk of electric shock. Disconnect power before servicing.
WARNING: Risk of electric shock. Do not operate electrical powered auxiliary devices near water.
WARNING: Risk of property damage. Building materials and wiring should be routed away from
the heat-producing components of the bath.
WARNING: Risk of injury or property damage. Please read all instructions thoroughly before
beginning installation.
NOTICE: Follow all plumbing, electrical, and building codes.
*Outside North America, this device may be known as a Residual Current Device (RCD).
Table of Contents
IMPORTANT INSTRUCTIONS ....................................................... 2
Product Identification .............................................................. 2
Specifications ................................................................... 2
Your Vibracoustic Bath ............................................................. 5
User Interface Icons ............................................................... 5
Operating Your Bath ............................................................... 6
Setting Menu .................................................................... 7
Experiences ..................................................................... 8
Chromatherapy (If Equipped) ........................................................ 9
Heated Surface ................................................................. 10
Auxiliary Sound ................................................................. 11
Adjusting Resonance ............................................................. 12
Components ................................................................... 13
Troubleshooting ................................................................. 13
Care and Cleaning ............................................................... 17
Warranty ...................................................................... 17
Warranty ...................................................................... 17
Product Identification
Model # K-_______________________
Please record the model number, copied from the label on the box.
Specifications
User Interface
Ambient Temperature Max 125°F (51.5°C)
Maximum Relative Humidity 100% condensing (External surface only)
Interface Cable Length 25’ (7.6 m)
Control Amplifier
Ambient Temperature Greater than 34°F (1°C), Max 104°F (40°C)
1212240-5-B 2 Kohler Co.