Specification

Technical Information
Fixture: Approx. measurements for comparison only.
Bathing well:
Basin area,
bottom
45-1/8″ (1146 mm) x 19-11/16″
(500 mm)
Basin area,
top
52-3/4″ (1340 mm) x 25-5/16″ (643 mm)
Weight 96 lbs (43.5 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 58 gal (219.6 L)
Amplifier/
control:
15 W (per
channel)
120 V 50/60 Hz -
Heater: 65 W 120 V 60 Hz 1.1 A
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD): 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide. Ensure
that the interface, amplifier, and transducers are functional
before completing the installation.
Control amplifier fits 16″ (406 mm) center studs. 25’ (7.6 m)
cables are included.
Locate the bath within 24″ (610 mm) of a GFCI-protected 120
V, 15 A grounded electrical outlet. A second grounded outlet
within the wall framing must be within 24″ (610 mm) of the
planned control amplifier. One electrical service may be used
for the entire bath and related electrical components.
Floor support under this product must provide for a minimum
of 45 lbs/square foot (219.7 kg/square meter) loading.
Will comply with ADA when installed per Section 607
Bathtubs of the 2010 ADA Standards for Accessible Design.
1-1/4"
(32 mm)
*Recommended User
Interface Location
Control Amplifier
User Interface
3-3/16"
(81 mm)
11-3/4"
(298 mm)
14-1/2"
(368 mm)
7/8"
(22 mm)
3-1/2"
(89 mm)
5-5/8"
(143 mm)
*10"
(254 mm)
*24"
(610 mm)
4-1/8"
(105 mm)
11-1/4"
(286 mm)
2-1/2"
(64 mm)
19"
(483 mm)
Integral Flange
Detail
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/4"
(32 mm)
1/2" (13 mm) R.
3/4" (19 mm)
1-1/2"
Bath Drain
60" (1524 mm)
32" (813 mm)
16"
(406 mm)
Lumbar
Angle 25˚
20-1/4"
(514 mm)
Product Diagram
ARCHER
®
ARCHER
®
5’ VIBRACOUSTIC
®
BATH WITH BASK HEATED SURFACE
Page2of2
1214585-4-
A