Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
45-1/8″ (1146 mm) x 19-11/16″
(500 mm)
Basin area, top 52-3/4″ (1340 mm) x 25-5/16″
(643 mm)
Weight 116 lbs (52.6 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Drop-in cut-out 58-1/2″ (1486 mm) x 30-1/2″ (775 mm)
VHzA
1-speed pump 120 60 7
Heated surface 120 60 0.5
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/Control/Heated
surface
120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 46 lbs/square foot (227 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
Locate a GFCI-protected 120 V, 15 A, grounded duplex
electrical outlet within 24″ (610 mm) of the bath junction box.
Will comply with ADA when installed per Section 607
Bathtubs of the ADA 2010 Standards for Accessible Design.
32" (813 mm)
60" (1524 mm)
1-1/2"
Bath Drain
3/4" (19 mm)
16"
(406 mm)
2-1/2"
(64 mm)
19"
(483 mm)
Drop-in Rim Detail
No change in measurements if connected
with drain illustrated. (K-7272)
11-1/4"
(286 mm)
1-1/2"
(38 mm)
4-1/8"
(105 mm)
Lumbar
Angle 25˚
Pump/Control Access
30" (762 mm) W x 15" (381 mm) H Min
1-1/2"
(38 mm)
17-1/2"
(445 mm)
Product Diagram
ARCHER
®
ARCHER
®
5’ BATH WHIRLPOOL WITH BASKTM
Page2of2
1201657-4-
A