Specification Sheet

3-1/8"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
Three dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzPump, Heater:
120 V, 15 A, 60 HzHeater:
120 V, 15 A, 60 HzBlower:
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Technical Information
All product dimensions are nominal.
This product is designed for drop-in installation
only. It is not suited for use in a three-wall alcove
with an overhead shower.
Drop-inInstallation:
EndDrain location:
Remote blower installation kit is available for
relocating the blower. Provide access for servicing
the blower.
45-1/8" x 19-11/16" (1146 mm x 500 mm)Basin area, bottom:
52-3/4" x 25-5/16" (1340 mm x 643 mm)Basin area, top:
160 lbs (72.6 kg)Weight:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
47.5 lbs/ft² (231.9 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
58 gal (219.6 L)Water capacity:
ADA compliant when installed to the specific
requirements of these regulations.
Drop-in, 58-1/2" x 30-1/2" (1486 mm x
775 mm)
Cutout:
Pump: 120 V, 7 A, 60 Hz
Heater: 120 V, 5 A, 60 Hz
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-2-2019 07:22 - US
Archer
®
drop-in whirlpool + Heated BubbleMassage
™
air bath
K-1122-XHGH