Rough-In Guide

Product Information
Applicable product:
Drop-in bath K-1123
Fixture*:
Bathing well
Basin area bottom 45-1/8″ (114.6 cm) x 19-11/16″
(50 cm)
Basin area top 52-3/4″ (134 cm) x 25-5/16″
(64.3 cm)
Weight 70 lbs (31.7 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (148.6 cm) x 30-1/2″ (77.5
cm)
Required accessories:
Clearflo slotted overflow brass bath drain OR K-7271
Clearflo slotted overflow bath drain – PVC pipe K-7272
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 44 lbs/square foot (212 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
This bath is designed for drop-in installation only. It is not
suited for use in a three wall alcove with an overhead shower.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
19"
(48.3 cm)
32" (81.3 cm)
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
No change in measurements if connected
with drain illustrated. (K-7272)
16" (40.6 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
60" (152.4 cm )
2-1/2"
(6.4 cm)
1-1/2"
Bath Drain
3/4" (1.9 cm)
4-1/8"
(10.5 cm)
Roughing-In
K-1123
ARCHER
TM
5’ (1.5 m) DROP-IN BATH
ARCHERTM 5’ (1.5 m) DROP-IN BATH
1071354-1-
C