Specification Sheet

Lumbar
Notes
Required Electrical Service
Measure your actual product for rough-in details.
Two dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower, Heated
Surface:
120 V, 15 A, 60 HzHeater:
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Technical Information
All product dimensions are nominal.
Remote blower installation kit is available for
relocating the blower. Provide access for servicing
the blower.
Three-wall alcoveInstallation:
RightDrain location:
64-1/2" x 30-1/2" (1638 mm x 775 mm)Basin area, top:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
121 lbs (54.9 kg)Weight:
42 lbs/ft² (205.1 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
72 gal (272.5 L)Water capacity:
Blower: 120 V, 10 A, 60 Hz
Heated Surface: 120 V, 0.5 A, 60 Hz
Heater: 120 V, 5 A, 60 Hz
Electrical component
rating:
1-9/16" (40 mm)Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-30-2019 03:41 - US
Archer
®
apron Heated BubbleMassage
™
air bath with Bask
®
K-1124-GHRAW