Specification

Technical Information
Fixture*:
Bathing well
Basin area bottom 51-3/8″ (130.5 cm) x 21″ (53.3 cm)
Basin area top 64-1/2″ (163.8 cm) x 30-1/2″
(77.5 cm)
Weight 115 lbs (52.1 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Blower
motor:
Heater V Hz A
1 hp 300 W 120 60 5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor: 120 V, 15 A, 60 Hz
Blower motor is supplied with a 24″ (61 cm)
grounding-type plug-in cord.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 42 lbs/square foot (201 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
No change in measurements if connected
with drain illustrated. (K-7272)
36" (91.4 cm)
72" (182.9 cm)
11-1/4"
(28.6 cm)
19"
(48.3 cm)
1-1/2" OD
18"
(45.7 cm)
1/2" (1.3 cm) R.
Integral Flange
Detail
1-1/4"
(3.2 cm)
3/4" (1.9 cm)
2-1/2"
(6.4 cm)
Product Diagram
ARCHERTM
ARCHERTM 6’ (1.8 m) BUBBLEMASSAGETM BATH WITH AIRJETS
Page2of2
1071369-4-
C