Rough-In Guide

Product Information
Applicable product:
Integral apron, left drain K-1124-LA
Integral apron, right drain K-1124-RA
Fixture*:
Bathing well:
Basin area, bottom 51-3/8″ (130.5 cm) x 21″ (53.3 cm)
Basin area, top 64-1/2″ (163.8 cm) x 30-1/2″ (77.5 cm)
Weight 135 lbs (61.2 kg)
To overflow:
Water depth 15″ (38.1 cm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Pump is supplied with 24″ (61 cm) grounding-type plug-in
cord.
Required accessories:
Clearflo slotted overflow brass bath
drain or
K-7271
Clearflo slotted overflow bath drain -
PVC pipe
K-7272
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″ (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
43 lbs/square foot (210 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
36" (91.4 cm)
72" (182.9 cm)
3/4" (1.9 cm)
1/2" (1.3 cm) R.
No change in measurements if connected
with drain illustrated. (K-7272)
Integral Flange
Detail
19"
(48.3 cm)
2-1/2"
(6.4 cm)
1-1/4"
(3.2 cm)
18"
(45.7 cm)
11-1/4"
(28.6 cm)
1-1/4"
(3.2 cm)
1-1/2"
Bath Drain
4-1/8"
(10.5 cm)
1063766-1-D 2 Kohler Co.