Specification

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 51-3/8″ (1305 mm) x 21″ (533 mm)
Basin area, top 64-1/2″ (1638 mm) x 30-1/2″
(775 mm)
Weight 116 lbs (52.6 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Drop-in cut-out 70-1/2″ (1791 mm) x 34-1/2″ (876 mm)
VHzA
1-speed pump 120 60 7
Heated surface 120 60 0.5
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/Control/Heated
surface
120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 41 lbs/square foot (201 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
Locate a GFCI-protected 120 V, 15 A, grounded duplex
electrical outlet within 24″ (610 mm) of the bath junction box.
Will comply with ADA when installed per Section 607
Bathtubs of the ADA 2010 Standards for Accessible Design.
1-1/2"
Bath Drain
3/4" (19 mm)
2-1/2"
(64 mm)
19"
(483 mm)
Drop-in Rim Detail
No change in measurements if connected
with drain illustrated. (K-7272)
11-1/4"
(286 mm)
1-1/2"
(38 mm)
4-1/8"
(105 mm)
Lumbar
Angle 42˚
Pump/Control Access
30" (762 mm) W x 15" (381 mm) H Min
72" (1829 mm)
36" (914 mm)
18"
(457 mm)
1-1/2"
(38 mm)
17-1/2"
(445 mm)
Product Diagram
ARCHER
®
ARCHER
®
6’ BATH WHIRLPOOL WITH BASKTM
Page2of2
1201659-4-
A