Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
51-3/8″ (1304 mm) x 21″ (533 mm)
Basin area,
top
64-1/2″ (1638 mm) x 30-1/2″ (775 mm)
Weight 70 lbs (31.7 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Drop-in cutout 70-1/2″ (1791 mm) x 34-1/2″ (877 mm)
Heater: W V HZ A
65 120 60 .5
Installation Notes
Install this product according to the installation guide.
Locate a GFCI-protected 120 V, 15 A, grounded electrical
outlet within 24″ (610 mm) of the bath junction box.
40″ (1016 mm) cable is included.
Floor support under this product must provide for a minimum
of 39 lbs/square foot (189 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
This bath is designed for drop-in installation only. It is not
suited for use in a three wall alcove with an overhead shower.
36" (914 mm)
72" (1829 mm)
3/4" (19 mm)
No change in measurements if connected
with drain illustrated. (K-7272)
Drop-in Rim
Detail
1-1/2"
(38 mm)
18"
(457 mm)
11-1/4"
(286 mm)
2-1/2"
(64 mm)
4-1/8"
(105 mm)
1-1/2"
Bath Drain
1-1/2"
(38 mm)
20-1/2"
(521 mm)
Lumbar Angle 42˚
19"
(483 mm)
Access Panel
30" (762 mm) L x
15" (381 mm) H Min
Product Diagram
ARCHERTM
ARCHERTM DROP-IN BATH WITH BASKTM HEATED SURFACE
Page2of2
1201637-4-
B