Rough-In Guide

Product Information
Applicable products:
Bath whirlpool – drop-in K-1139
Bath whirlpool – tile flange, left drain K-1139-L
Bath whirlpool – tile flange, right drain K-1139-R
Fixture*:
Basin area:
Bathing well 46″ (116.8 cm) x 15″ (38.1 cm)
Top area 55″ (139.7 cm) x 25″ (63.5 cm)
Weight 55 lbs (25 kg)
To overflow
Water depth 14″ (35.6 cm)
Capacity 57 gal (216 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (148.6 cm) x 34-1/2″ (87.6 cm)
Pump: V Hz A
1-speed 120 60 7.5
Minimum access panel
(required):
20″ (50.8 cm) x 15″ (38.1 cm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
37 lbs/square foot (180.9 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
This fixture conforms to ANSI Standard Z124.1.2. All
dimensions are nominal.
1-1/4"
(3.2 cm)
Tile Flange
Detail
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
1-1/2" OD
1" (2.5 cm)
8" (20.3 cm)
2-7/8" (7.3 cm)
3/8" (1 cm)
36" (91.4 cm)
60" (152.4 cm)
3" (7.6 cm)
Pump/Control Access
(If Apron is Not Used)
16-5/8"
(42.2 cm)
18-1/8"
(46 cm)
2-1/2"
(6.4 cm)
No change in measurements if connected with drain
illustrated. (K-11677)
18"
(45.7 cm)
Roughing-In
K-1139, K-1139-L, K-1139-R
PROFLEX
®
6036
BATH WHIRLPOOL
PROFLEX
®
6036 BATH WHIRLPOOL
1013749-1-
C