Specification Sheet

No change in measurements if connected with drain
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzPump:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Drop-inInstallation:
EndDrain location:
46" x 23" (1168 mm x 584 mm)Basin area, bottom:
55" x 25" (1397 mm x 635 mm)Basin area, top:
55 lbs (24.9 kg)Weight:
37 lbs/ft² (180.6 kg/m²)Minimum floor load:
14" (356 mm)Water depth:
57 gal (215.8 L)Water capacity:
Drop-in, 58-1/2" x 34-1/2" (1486 mm x
876 mm)
Cutout:
Pump: 120 V, 7.5 A, 60 HzElectrical component
rating:
SinglePump speed:
2-3/8" (61 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 04:47
ProFlex
®
6036
5' Whirlpool Bath
K-1139