Rough In Guide

Product Information
Fixture: Approx. measurements for comparison only.
Bathing well:
Basin area 45″ (1143 mm) x 22″ (559 mm)
Top area 54″ (1372 mm) x 25″ (635 mm)
Weight 96 lbs (43.5 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 60 gal (227.1 L)
Amplifier/
control:
15 W (per
channel)
120 V 50/60 Hz -
Heater: 65 W 120 V 60 Hz 1.1 A
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD): 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide. Ensure
that the interface, amplifier, and transducers are functional
before completing the installation.
Control amplifier fits 16″ (406 mm) center studs. 25’ (7.6 m)
cables are included.
Locate the bath within 24″ (610 mm) of a GFCI-protected 120
V, 15 A grounded electrical outlet. A second grounded outlet
within the wall framing must be within 24″ (610 mm) of the
planned control amplifier. One electrical service may be used
for the entire bath and related electrical components.
Floor support under bath must provide for a minimum of
45 lbs/square foot (219.7 kg/square meter) loading.
Fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
1-1/4"
(32 mm)
1-1/2"
Bath Drain
Integral Flange Detail
No change in measurements if connected
with drain illustrated. (K-11677)
1/2" (13 mm) R.
1-1/4"
(32 mm)
32" (813 mm)
20"
(508 mm)
3-1/2"
(89 mm)
9" (229 mm)
15-1/2"
(394 mm)
2-1/2"
(64 mm)
1" (25 mm)
60" (1524 mm)
*Recommended User
Interface Location
Control Amplifier
User Interface
3-3/16"
(81 mm)
11-3/4"
(298 mm)
14-1/2"
(368 mm)
7/8"
(22 mm)
3-1/2"
(89 mm)
5-5/8"
(143 mm)
*10"
(254 mm)
*24"
(610 mm)
Lumbar
Angle 34˚
21-1/4"
(540 mm)
Roughing-In
K-1151-VBLAW, K-1151-VBRAW
BANCROFT
®
5’ VIBRACOUSTIC
®
BATH WITH BASK HEATED SURFACE
BANCROFT
®
5’ VIBRACOUSTIC
®
BATH WITH BASK HEATED SURFACE
1214589-1-
A