Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
46″ (1168 mm) x 30″ (762 mm)
Basin area, top 57″ (1448 mm) x 34″ (864 mm)
Weight 130 lbs (59 kg)
To overflow:
Water depth 16″ (406 mm)
Capacity 95 gal (359.6 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1043292-7
Pump kW V Hz A
Variable-
speed
1.5 240 50/60 11
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 220-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
50 lbs/square foot (242 kg/square meter).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
A minimum access panel is required.
1-1/2" OD
1" (25 mm)
65-7/8" (1673 mm)
41-3/4" (1060 mm)
No change in measurements if connected
with drain illustrated. (K-7161-AF)
2"
(51 mm)
22"
(559 mm)
2-7/8"
(73 mm)
2-3/4"
(70 mm)
11-1/4"
(286 mm)
2-1/4"
(57 mm)
20-7/8"
(530 mm)
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H
Product Diagram
BANCROFT
®
BANCROFT
®
5.5’ BATH WHIRLPOOL
Page2of2
1043845-4-
C