Rough-In Guide

Product Information
Applicable product:
Drop-in rim style, right-hand pump K-1160
Tile flange, right-hand pump K-1160-F
Fixture*:
Bathing well:
Basin area, bottom 52” (132.1 cm) x 38-3/4” (98.4 cm)
Basin area, top 61” (154.9 cm) x 46-1/4” (117.5 cm)
Weight 118 lbs (53.6 kg)
To overflow:
Water depth 15” (38.1 cm)
Capacity 96 gal (363.6 L)
* Approximate measurements for comparison only.
Pump: 1-speed 120 V 60 Hz 7.5 A
Minimum access panel
pump/control (required):
20″ (50.8 cm) W x
15″ (38.1 cm) H
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″ (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
38 lbs/square foot (186 kg/square meter) loading.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
27-1/2" (69.9 cm)
135˚
1-1/2" OD
135˚
3" (7.6 cm)
60" (152.4 cm)
35"
(88.9 cm)
35"
(88.9 cm)
60"
(152.4 cm)
29" (73.7 cm)
29"
(73.7 cm)
1/2" (1.3 cm)
43-3/4"
(111.1 cm)
13-1/8"
(33.3 cm)
4-7/8"
(12.4 cm)
Drop-In Rim Style
Cut-Out Detail
57-1/2"
(146.1 cm)
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
2-7/8" (7.3 cm)
63"
(160 cm)
19-1/2"
(49.5 cm)
2-7/8"
(7.3 cm)
21"
(53.3 cm)
1-1/4"
(3.2 cm)
Tile Flange
Detail
Pump/Control
Access
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
1042004-1-B 2 Kohler Co.