Specification

Technical Information
Fixture*:
Basin area:
Bathing well 52” (1321 mm) x 38-3/4” (984 mm)
Top area 61” (1549 mm) x 46-1/4” (1175 mm)
Weight 151 lbs (68.5 kg)
To overflow:
Water depth 15” (381 mm)
Capacity 96 gal (363.6 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
1.5 120 60 12.5
Required Electrical Service
Two dedicated circuit required, each protected with Class
A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlets onto the wooden stud provided, as
illustrated below.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
39 lbs/square foot (188 kg/square meter) loading.
Ø 1-1/2" OD
3"
(76 mm)
60" (1524 mm)
2-7/8"
(73 mm)
60"
(1524 mm)
35"
(889 mm)
63"
(1600 mm)
35"
(889 mm)
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
29"
(737 mm)
1-1/4"
(32 mm)
Tile Flange
Detail
4-7/8"
(124 mm)
29"
(737 mm)
13-1/8"
(333 mm)
43-3/4"
(1111 mm)
21"
(533 mm)
19-1/2"
(495 mm)
Pump/Control Access
1/2" (13 mm)
Wooden Stud
(Provided)
2-7/8"
(73 mm)
Product Diagram
TERCET
®
TERCET
®
BATH WHIRLPOOL WITH INTEGRAL APRON AND HEATER
Page2of2
1041920-4-
E