Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
43″ (1092 mm) x 21-9/16″ (548 mm)
Basin area,
top
53-1/2″ (1359 mm) x 32-1/8″ (816 mm)
Weight 110 lbs (50 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 57 gal (215.9 L)
* Approximate measurements for comparison only.
Included components:
Cutout template 1042556-7
Blower motor Heater V Hz A
300 W 120 60 10
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the bath and within 24″
(610 mm) of the blower.
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 35
lbs/square foot (171 kg/square meter) loading.
2-7/8"
(73 mm)
3" (76 mm)
Drop-In Rim Detail
Recommended faucet area
1-1/2"
(38 mm)
18-1/2"
(470 mm)
3-1/2"
(89 mm)
Blower/Control Access
20" (508 mm) W x
15" (381 mm) H Min
No change in measurements if connected with
drain illustrated. (K-11677)
21"
(533 mm)
1-1/2" Bath Drain
10-13/16"
(275 mm)
60" (1524 mm)
42" (1067 mm)
20"
(508 mm)
1-1/2"
(38 mm)
Lumbar
Angle 33˚
Product Diagram
SUNWARD
®
SUNWARD
®
BUBBLEMASSAGETM BATH
Page2of2
1192048-4-
B