Specification

Technical Information
Fixture:* basin area top area weight
Bathing
well
55-1/4″ (140.3
cm) x 23-1/2″
(59.7 cm)
64-1/2″ (163.8
cm)x32″(81.3
cm)
112 lbs.
(50.9
kg)
water depth capacity
To
overflow
15″ (38.1 cm) 75 gal. (284.1 L)
* Approximate measurements for comparison only.
Pump: HP V Hz A
1-speed 1-1/4 120 60 7.5
Minimum access panel pump/control:
20″ (50.8 cm)Wx15″(38.1 cm) H required
Included Components:
Cut-out template 1042557-7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24” (61
cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
80 lbs./square foot (390 kg/square meter) loading.
4-3/4" (12.1 cm)
1-1/2" OD
10-13/16" (27.5 cm)
72" (182.9 cm)
3" (7.6 cm)
2-7/8" (7.3 cm)
3/8" (1 cm)
42" (106.7 cm)
21"
(53.3 cm)
3-1/8"
(7.9 cm)
3-1/2"
(8.9 cm)
21"
(53.3 cm)
19-1/2"
(49.5 cm)
Pump/Control
Access
1-1/2"
(3.8 cm)
Drop-In Rim Detail
Recommended faucet area
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Product Diagram
SUNWARDTM
SUNWARDTM 6’ BATH WHIRLPOOL
Page2of2
1041944-4-
B