Specification

Technical Information
Fixture*:
Bathing well;
Basin area,
bottom
55-1/4″ (1403 mm) x 23-1/2″ (597 mm)
Basin area,
top
64-1/2″ (1638 mm) x 32″ (813 mm)
Weight 112 lbs (50.9 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 75 gal (284.1 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1042557-7
Blower motor Heater V Hz A
300 W 120 60 5
Minimum access panel blower motor:
20″ (508 mm) W x 15″ (381 mm) H required
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 5 A, 60 Hz
Locate the outlet behind the bath and within 24″
(610 mm) of the blower.
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 37
lbs/square foot (178 kg/square meter) loading.
2-3/4" (70 mm)
1-1/2" OD
72" (1829 mm)
3" (76 mm)
2-7/8" (73 mm)
42" (1067 mm)
Drop-In Rim Detail
Recommended faucet area
21"
(533 mm)
3-1/8"
(79 mm)
11-1/16"
(281 mm)
3-1/2"
(89 mm)
1-1/2"
(38 mm)
19-1/2"
(495 mm)
1-1/2"
(38 mm)
No change in measurements if connected with
drain illustrated. (K-11677)
Blower/Control Access
20" (508 mm) W x
15" (381 mm) H Min
1" (25 mm) from
the Floor to the
Bottom of the Drain
Product Diagram
SUNWARD
®
SUNWARD
®
BUBBLEMASSAGETM BATH
Page2of2
1079336-4-
E