Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
55-1/4″ (1403 mm) x 23-1/2″ (597 mm)
Basin area, top 64-1/2″ (1638 mm) x 32″ (813 mm)
Weight 112 lbs (50.9 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 75 gal (284.1 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1042557-7
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
1.5 120 60 12.5
Minimum access panel pump/control:
20″ (508 mm) W x 15″ (381 mm) H required
Required Electrical Service
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24”
(610 mm) of the pump and heater.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
37 lbs/square foot (178 kg/square meter) loading.
Drop-In Rim Detail
Recommended faucet area
21"
(533 mm)
3-1/8"
(79 mm)
3-1/2"
(89 mm)
Pump/Control Access
19-1/2"
(495 mm)
21"
(533 mm)
1-1/2"
(38 mm)
No change in measurements if connected with
drain illustrated. (K-11677)
Ø 1-1/2"
10-13/16"
(275 mm)
72" (1829 mm)
3"
(76 mm)
2-7/8"
(73 mm)
3/8" (10 mm)
42" (1067 mm)
4-3/4"
(121 mm)
Product Diagram
SUNWARD
®
SUNWARD
®
BATH WHIRLPOOL
Page2of2
1041945-4-
F