Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
55-1/4″ (1403 mm) x 23-1/2″ (597 mm)
Basin area, top 64-1/2″ (1638 mm) x 32″ (813 mm)
Weight 118 lbs (53.5 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 75 gal (284.1 L)
* Approximate measurements for comparison only.
VHzA
1-speed pump 120 60 7
Heated surface 120 60 .5
Included components:
Cut-out template 1042557-7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI).
Pump/Control/Heated
surface
120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under the bath whirlpool must provide for a
minimum of 37 lbs/square foot (178 kg/square meter) loading.
Locate a GFCI-protected 120 V, 15 A, grounded duplex
electrical outlet within 24″ (610 mm) of the pump.
2-7/8"
(73 mm)
3" (76 mm)
Drop-In Rim Detail
Recommended faucet area
1-1/2" Bath Drain
10-13/16"
(275 mm)
42" (1067 mm)
3/8" (10 mm)
19-1/2"
(495 mm)
21"
(533 mm)
3-1/2"
(89 mm)
21"
(533 mm)
Pump/Control Access
30" (762 mm) W x 15" (381 mm) H
1-1/2"
(38 mm)
No change in measurements if connected with
drain illustrated. (K-11677)
1-1/2"
(38 mm)
4-3/4"
(121 mm)
72" (1829 mm)
Lumbar
Angle 33˚
Product Diagram
SUNWARD
®
SUNWARD
®
6’ BATH WHIRLPOOL WITH BASKTM
Page2of2
1201678-4-
B