Specification

Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other___
K-1601 Footstop ❑ 0 ❑ Other___
K-1705 Remote control ❑ NA
K-9498 3″ (76 mm) whirlpool keypad trim ❑ CP ❑ PB ❑ Other___
Technical Information
Fixture: Approx. measurements for comparison only.
Bathing well:
Basin area,
bottom
42-7/16″ (1078 mm) x 20″ (508 mm)
Basin area,
top
54-5/16″ (1380 mm) x 24-1/4″ (616 mm)
Weight 106 lbs (48.1 kg)
To overflow:
Water depth 15-1/8″ (384 mm)
Capacity 59.8 gal (226 L)
VHzA
Blower motor/Heated surface 220-240 50/60 5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated
surface
220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
This unit is not intended for flush-mount apron installation.
Floor support under bath must provide for a minimum of 44
lbs/square foot (212 kg/square meter) loading.
60" (1524 mm)
20-1/4"
(514 mm)
30"
(762 mm)
3-11/16"
(94 mm)
15"
(381 mm)
12-5/8"
(321 mm)
13/16"
(21 mm)
4-1/8"
(105 mm)
No change in measurement if connected with
drain illustrated. (K-7272)
1-1/2" Bath Drain
1-1/4"
(32 mm)
Tile Flange
Detail
19"
(483 mm)
Blower Motor/Control Access
30" (762 mm) W x
15" (381 mm) H Min
Lumbar Angle 40˚
1-1/4"
(32 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
5’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201705-4-
B