Dimensions Guide

1"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower, Amplifier,
Heated Surface:
Technical Information
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
All product dimensions are nominal.
Drop-in, Under-mountInstallation:
One electrical service may be used for the entire
bath and related electrical components.
EndDrain location:
42-3/8" x 20" (1076 mm x 508 mm)Basin area, bottom:
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
54-3/8" x 24-5/16" (1381 mm x 618 mm)Basin area, top:
106 lbs (48.1 kg)Weight:
Kit is required for under-mount installations (sold
separately).
50 lbs/ft² (244.1 kg/m²)Minimum floor load:
15-1/16" (383 mm)Water depth:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
59.8 gal (226.4 L)Water capacity:
Drop-in, 59-1/2" x 28-1/2" (1511 mm x
724 mm)
Cutout:
Blower: 120 V, 10 A, 60 Hz
Amplifier: 120 V, 1.1 A, 50/60 Hz
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-5-2018 08:43
Underscore
®
Rectangle
5' VibrAcoustic
®
BubbleMassage
™
Bath
K-1167-GVBCW