Specification Sheet

19"
(483 mm)
3/4"
(19 mm)
4-1/8"
(105 mm)
15-15/16"
(405 mm)
2-5/16"
(59 mm)
12-5/8"
(321 mm)
15"
(381 mm)
Lumbar
Angle 40°
60" (1524 mm)
1-1/2" Bath Drain
No change in measurements if connected
with drain illustrated. (K-7271)
Blower Motor Access
20" (508 mm) W x 15" (381 mm) H Min
30" (762 mm)
Drop-in Rim
Detail
1"
(25 mm)
1"
(25 mm)
Notes
Required Electrical Service
Measure your actual product for rough-in details.
Two dedicated circuits required.
Install this product according to the installation
instructions.
120 V, 15 A, 60 HzPump:
120 V, 15 A, 60 HzHeater:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Drop-inInstallation:
ADA compliant when installed to the specific
requirements of these regulations.
EndDrain location:
42-7/16" x 20" (1078 mm x 508 mm)Basin area, bottom:
54-5/16" x 24-1/4" (1380 mm x 617 mm)Basin area, top:
135.8 lbs (61.6 kg)Weight:
46 lbs/ft² (224.6 kg/m²)Minimum floor load:
14-3/4" (374 mm)Water depth:
59.8 gal (226.4 L)Water capacity:
Drop-in, 59-1/2" x 28-1/2" (1511 mm x
724 mm)
Cutout:
Pump: 120 V, 7 A, 60 Hz
Heater: 120 V, 12 A, 60 Hz
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-21-2020 18:14 - US/CA
Underscore
®
Rectangle
60" x 30" heated whirlpool bath with reversible drain
K-1167-JH