Dimensions Guide

20-1/4"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 A, 50/60 HzAmplifier:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
3-Wall AlcoveInstallation:
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
LeftDrain location:
42-3/8" x 20" (1076 mm x 508 mm)Basin area, bottom:
ADA compliant when installed to the specific
requirements of these regulations.
54-3/8" x 24-5/16" (1381 mm x 618 mm)Basin area, top:
80 lbs (36.3 kg)Weight:
50 lbs/ft² (244.1 kg/m²)Minimum floor load:
15-1/16" (383 mm)Water depth:
59.8 gal (226.4 L)Water capacity:
Amplifier: 120 V, 1.1 A, 50/60 HzElectrical component
rating:
2 at 15 W per channel
2 at 30 W per channel
Amplifier channels:
2-1/2" (63 mm)Minimum flat for door:
33 ft (0.8 m)Bluetooth® range:
3.0Bluetooth® version:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-5-2018 08:44
Underscore
®
Rectangle
5' VibrAcoustic
®
Bath
K-1167-LVBC