Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
42-7/16″ (1078 mm) x 20″ (508 mm)
Basin area, top 54-5/16″ (1380 mm) x 24-1/4″ (616
mm)
Weight 80 lbs (36.3 kg)
To overflow:
Water depth 15-1/8″ (384 mm)
Capacity 59.8 gal (226 L)
* Approximate measurements for comparison only.
Amplifier/
control:
Power per channel (rms)
W
VHz
15 120 50/60
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Amplifier/control 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Control amplifier fits 16″ (406 mm) center studs. 25’ (7.6 m)
cables are included.
A grounded outlet within the wall framing must be within 24″
(610 mm) of the planned control amplifier.
Floor support under bath must provide for a minimum of 50
lbs/square foot (242 kg/square meter) loading.
Ensure that the bath, user interface, amplifier, and
transducers are functional before completing the installation.
1-1/4"
(32 mm)
60" (1524 mm)
19"
(483 mm)
30"
(762 mm)
15"
(381 mm)
12-5/8"
(321 mm)
13/16"
(21 mm)
4-1/8"
(105 mm)
No change in measurement if connected with
drain illustrated. (K-7272)
1-1/2" Bath Drain
Lumbar
Angle 40˚
*24"
(610 mm)
*10"
(254 mm)
5-5/8"
(143 mm)
3-1/2"
(89 mm)
7/8"
(22 mm)
User Interface
*Recommended User
Interface Location
3-11/16"
(94 mm)
Control Amplifier
14-1/2"
(368 mm)
11-3/4"
(298 mm)
3-3/16"
(81 mm)
14-1/2"
(368 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
5’ VIBRACOUSTIC BATH
Page2of2
1188020-4-
C