Dimensions Guide

Blower Motor/Control Access
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
240 V, 15 A, 50/60 HzBlower:
Technical Information
All product dimensions are nominal.
If relocating the blower motor, do not relocate or
alter the PVC tee or coiled flexible tubing
3-Wall AlcoveInstallation:
RightDrain location:
connected to the blower. Follow the blower
relocation instructions exactly. Provide access
for servicing the blower.
42-3/8" x 20" (1076 mm x 508 mm)Basin area, bottom:
54-3/8" x 24-5/16" (1381 mm x 618 mm)Basin area, top:
ADA compliant when installed to the specific
requirements of these regulations.
100 lbs (45.4 kg)Weight:
44 lbs/ft² (214.8 kg/m²)Minimum floor load:
15-1/16" (383 mm)Water depth:
59.8 gal (226.4 L)Water capacity:
Blower: 240 V, 15 A, 50/60 HzElectrical component
rating:
VariableBlower speed:
2-1/2" (63 mm)Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 08:42
Underscore
®
Rectangle
5' BubbleMassage
™
Bath
K-1167-RGCR