Installation Guide

3. Install the Drain Ell
CAUTION: Risk of property damage. Do not reposition the
drain ell after the strainer body is tightened. Moving the
drain ell may damage the seal created when the strainer is
tightened, increasing the risk of leaking.
Apply a ring of plumbers putty or other sealant around the
underside of the strainer body. Refer to the plumbers putty or
sealant manufacturer’s instructions.
Fit the gasket between the drain ell and below the bath drain
outlet.
Thread the strainer body into the drain ell.
Using pliers handles, tighten the strainer body securely into the
drain ell.
Place the strainer into the drain ell.
Thread the screw into the strainer.
Remove any excess sealant.
Bath
Strainer Body
Gasket
Screw
Strainer
Drain Ell
Apply plumbers putty.
1114757-2-B 6 Kohler Co.