Dimensions Guide

6-5/8"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower, Heated
Surface, Amplifier:
Technical Information
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
All product dimensions are nominal.
Drop-in, Under-mountInstallation:
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
EndDrain location:
42" x 23-1/2" (1067 mm x 597 mm)Basin area, bottom:
One electrical service may be used for the entire
bath and related electrical components.
55-1/8" x 27-1/8" (1400 mm x 689 mm)Basin area, top:
110 lbs (49.9 kg)Weight:
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
58.6 lbs/ft² (286.1 kg/m²)Minimum floor load:
17-1/8" (435 mm)Water depth:
Kit is required for under-mount installations (sold
separately).
81 gal (306.6 L)Water capacity:
Drop-in, 59-1/2" x 31-1/2" (1511 mm x
800 mm)
Cutout:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
Blower: 120 V, 10 A, 60 Hz
Heated Surface: 120 V, 0.5 A, 60 Hz, 65
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-5-2018 08:46
Underscore
®
Rectangle
5' VibrAcoustic
®
BubbleMassage
™
Bath
K-1168-GVBCW