Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
42″ (1067 mm) x 23-1/2″ (597 mm)
Basin area,
top
55-1/8″ (1400 mm) x 27-1/8″ (689 mm)
Weight 80 lbs (36.3 kg)
To overflow:
Water depth 17-1/8″ (435 mm)
Capacity 81 gal (306.6 L)
* Approximate measurements for comparison only.
Drop-in cut-out 59-1/2″ (1511 mm) x 31-1/2″ (800 mm)
Amplifier/
control:
Power per channel (rms) W V Hz
15 120 50/60
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Amplifier/control: 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
The bath is intended for under-mount/drop-in installation.
Control amplifier fits 16″ (406 mm) center studs.
A grounded outlet within the wall framing must be within 24″
(610 mm) of the planned control amplifier.
Cables are included, 25’ (7.6 m) each.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Floor support under bath must provide for a minimum of 58.6
lbs/square foot (286 kg/square meter) loading.
Ensure that the bath, user interface, amplifier, and
transducers are functional before completing the installation.
1"
(25 mm)
60" (1524 mm)
21"
(533 mm)
32"
(813 mm)
2-1/4"
(57 mm)
16"
(406 mm)
12-5/8"
(321 mm)
1/2"
(13 mm)
4-1/8"
(105 mm)
No change in measurement if connected with
drain illustrated. (K-7272)
1-1/2" Bath Drain
5-5/8"
(143 mm)
3-1/2"
(89 mm)
7/8"
(22 mm)
Lumbar
Angle 34˚
*10"
(254 mm)
*24"
(610 mm)
*Recommended User
Interface Location
14-1/2"
(368 mm)
11-3/4"
(298 mm)
3-3/16"
(81 mm)
User Interface
Control Amplifier
18-1/4"
(464 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
5’ VIBRACOUSTIC BATH
Page2of2
1188014-4-
B