Specification

Technical Information
Fixture*:
Basin area:
Bathing well 42″ (1067 mm) x 27″ (686 mm)
Top area 54″ (1372 mm) x 30″ (762 mm)
Weight 134 lbs (60.8 kg)
To overflow:
Water depth 16″ (406 mm)
Capacity 81 gal (306.6 L)
* Approximate measurements for comparison only.
Drop-in
cut-out
64-1/2″ (1638 mm) x 40-1/2″ (1029 mm)
Pump: kW V Hz A
1.5 240 50/60 11
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 220/240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
44 lbs/square foot (212 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
If installing a rim-mount faucet, make sure there is no
interference with drain overflow and circulating system before
drilling any holes. Consult local and national codes for
minimum air gap requirements if installing a spout on the
faucet deck.
This whirlpool is designed for drop-in installation only. It is not
suited for use in a three wall alcove with an overhead shower.
3" (76 mm)
3"
(76 mm)
2-7/8"
(73 mm)
66" (1676 mm)
42" (1067 mm)
1-1/16" (27 mm)
5-1/4" (133 mm)
11-3/4"
(298 mm)
20-1/8"
(511 mm)
Ø 1-1/2"
33" (838 mm)
22"
(559 mm)
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H
Product Diagram
MEMOIRS
®
MEMOIRS
®
5.5’ BATH WHIRLPOOL
Page2of2
1024311-4-
E