Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
44-1/2″ (1130 mm) x 26-1/2″ (673 mm)
Basin area,
top
60-1/4″ (1530 mm) x 30-1/4″ (768 mm)
Weight 85 lbs (38.6 kg)
To overflow:
Water depth 17-3/4″ (451 mmm)
Capacity 102 gal (386 L)
* Approximate measurements for comparison only.
Drop-in cut-out 65″ (1651 mm) x 35″ (889 mm)
Amplifier/
control:
Power per channel
(rms) W
VHz
15 120 50/60
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Amplifier/control 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Control amplifier fits 16″ (406 mm) center studs. 25’ (7.6 m)
cables are included.
A grounded outlet within the wall framing must be within 24″
(610 mm) of the planned control amplifier.
Floor support under bath must provide for a minimum of 64
lbs/square foot (313 kg/square meter) loading.
Ensure that the bath, user interface, amplifier, and
transducers are functional before completing the installation.
Lumbar
Angle 40˚
1-1/2"
Bath Drain
No change in measurements if connected with
drain illustrated. (K-7272)
16-3/4"
(425 mm)
22"
(559 mm)
36" (914 mm)
1"
(25 mm)
3/4"
(19 mm)
4-1/8"
(105 mm)
2-1/4"
(57 mm)
66" (1676 mm)
18"
(457 mm)
*10"
(254 mm)
*Recommended User
Interface Location
5-5/8"
(143 mm)
3-1/2"
(89 mm)
User Interface
Control Amplifier
14-1/2"
(368 mm)
11-3/4"
(298 mm)
3-3/16"
(81 mm)
7/8"
(22 mm)
*24"
(610 mm)
19"
(483 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
5.5’ VIBRACOUSTIC BATH
Page2of2
1181167-4-
B