Specification

Optional Accessories (cont.)
K-1705 Remote control N/A
K-9498 3″ (76 mm) whirlpool keypad trim ❑ CP ❑ Other_____
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
45-3/4″ (1162 mm) x 32″ (813 mm)
Basin area, top 66″ (1676 mm) x 36″ (914 mm)
Weight 110 lbs (49.9 kg)
To overflow:
Water depth 19″ (483 mm)
Capacity 139 gal (526.2 L)
* Approximate measurements for comparison only.
Drop-in cut-out 70-1/2″ (1791 mm) x 40-1/2″ (1029
mm)
Blower
motor/control:
Heater V Hz A
300 W 220-240 50/60 3
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/control 220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 42
lbs/square foot (204 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
A blower motor/control access panel is required.
1-1/2"
Bath Drain
No change in measurements if connected with
drain illustrated. (K-7272)
21"
(533 mm)
36" (914 mm)
1-1/2"
(38 mm)
Blower Motor/
Control Access
34" (864 mm) W x
15" (381 mm) H Min
42" (1067 mm)
1"
(25 mm)
4-1/8"
(105 mm)
23"
(584 mm)
72" (1829 mm)
2-1/4"
(57 mm)
1/2" (13 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
6’ BUBBLEMASSAGETM BATH
Page2of2
1087306-4-
D