Specification

(cont.) Optional Accessories
K-1703 Remote control ❑ NA
K-9498 3″ (76 mm) whirlpool keypad trim ❑ CP ❑ PB ❑ Other_____
1013469 Trim ring, interface, core ❑ CP ❑ PB ❑ Other_____
Technical Information
Fixture: Approx. measurements for comparison only.
Bathing well:
Basin area,
bottom
45-3/4″ (1162 mm) x 32″ (813 mm)
Basin area, top 66″ (1676 mm) x 36″ (914 mm)
Weight 116 lbs (52.6 kg)
Water depth 19″ (483 mm) to overflow
Capacity 139 gal (526.2 L) to overflow
VHzA
Blower motor/Heated surface 220-240 50/60 5
Drop-in cutout 70-1/2″ (1791 mm) x 40-1/2″
(1029 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated
surface
220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 42
lbs/square foot (204 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
1-1/2"
Bath Drain
No change in measurements if connected with
drain illustrated. (K-7272)
21"
(533 mm)
36"
(914 mm)
Blower Motor/
Control Access
34" (864 mm) W x
15" (381 mm) H Min
42" (1067 mm)
1"
(25 mm)
4-1/8"
(105 mm)
23"
(584 mm)
72" (1829 mm)
2-1/4"
(57 mm)
1/2" (13 mm)
Lumbar
Angle 33˚
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
6’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201699-4-
B