Dimensions Guide

*24"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 A, 50/60 HzAmplifier:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Drop-in, Under-mountInstallation:
Kit is required for under-mount installations (sold
separately).
CenterDrain location:
45-3/4" x 32" (1162 mm x 813 mm)Basin area, bottom:
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
66" x 36" (1676 mm x 914 mm)Basin area, top:
90 lbs (40.8 kg)Weight:
61 lbs/ft² (297.8 kg/m²)Minimum floor load:
19" (483 mm)Water depth:
139 gal (526.2 L)Water capacity:
Drop-in, 70-1/2" x 40-1/2" (1791 mm x
1029 mm)
Cutout:
Amplifier: 120 V, 1.1 A, 50/60 HzElectrical component
rating:
2 at 15 W per channel
2 at 30 W per channel
Amplifier channels:
2-1/2" (64 mm)Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-5-2018 08:48
Underscore
®
Rectangle
6' VibrAcoustic
®
Bath
K-1174-VBC