Rough-In Guide

Product Information
Applicable product:
Bath for drop-in installation K-1184
Bath with integral apron for alcove
installation – left drain
K-1184-LA
Bath with integral apron for alcove
installation – right drain (shown)
K-1184-RA
Fixture*:
Basin area:
Bathing well 42″ (106.7 cm) x 20″ (50.8 cm)
Top area 51″ (129.5 cm) x 24″ (61 cm)
To overflow:
Water depth 14″ (35.6 cm)
Capacity 60 gal (277.1 L)
Weight K-1184 70 lbs (31.8 kg)
K-1184-LA,
K-1184-RA
80 lbs (36.3 kg)
* Approximate measurements for comparison only.
Drop-in cut-out
[K-1184]
58″ (147.3 cm) x 30″ (76.2 cm)
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 41
lbs/square foot (202 kg/square meter) loading.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
K-1184-LA/RA
K-1184-LA/RA K-1184
16" (40.6 cm)
2-1/4"
(5.7 cm)
9" (22.9 cm)
1-1/4"
(3.2 cm)
3" (7.6 cm)
1-1/2" OD
2-1/2"
(6.4 cm)
1" (2.5 cm)
60" (152.4 cm)
32" (81.3 cm)
Integral Flange
Detail
Drop-in
Rim Detail
1-1/4"
(3.2 cm)
1/2" (1.3 cm)
R. Max
1-1/2"
(3.8 cm)
20"
(50.8 cm)
18-1/2"
(47 cm)
Roughing-In
K-1184, K-1184-LA, K-1184-RA
DEVONSHIRE
®
BATH
DEVONSHIRE
®
BATH
1014141-1-
B