Specification Sheet

1" (25 mm)
Notes
Required Electrical Service
Measure your actual product for rough-in details.
Two dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
240 V, 20 A, 50/60 HzPump:
240 V, 20 A, 50/60 HzHeater:
Technical Information
Consult local and national codes for minimum air
gap requirements when installing a spout on the
faucet deck.
All product dimensions are nominal.
Drop-inInstallation:
RightDrain location:
Unit must be filled through the bathing well.
45" x 25-1/2" (1143 mm x 648 mm)Basin area, bottom:
61-1/2" x 30-1/4" (1562 mm x 768 mm)Basin area, top:
275 lbs (124.7 kg)Weight:
65 lbs/ft² (317.4 kg/m²)Minimum floor load:
23-1/2" (597 mm)Water depth:
142 gal (537.5 L)Water capacity:
Drop-in, 73-1/2" x 39-1/2" (1867 mm x
1003 mm)
Cutout:
Pump: 240 V, 17 A, 50/60 Hz
Heater: 240 V, 17 A, 50/60 Hz, 4000 W
Electrical component
rating:
VariablePump speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 05:12
sok
®
Overflowing Effervescence Bath
K-1188-RE