Specification

Technical Information
Fixture*:
Bathing well
Basin area, bottom 47″ (1194 mm) x 20″ (508 mm)
Basin area, top 53″ (1346 mm) x 23″ (584 mm)
Weight 105 lbs (47.6 kg)
To overflow
Water depth 14-1/2″ (368 mm)
Capacity 64 gal (242.3 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (1486 mm) x 30-1/2″ (775 mm)
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
1.5 120 60 12.5
Required Electrical Service
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for minimum of
50 lbs/square foot (243 kg/square meter) loading.
A minimum access panel of 20″ (508 mm) W x 15″ (381 mm)
H is required.
Rim-mount faucet installations: Before drilling the mounting
holes, ensure the faucet does not interfere with the drain
overflow and circulating system.
Deck-mount spout installations: Consult local and national
codes for minimum air gap requirements.
The apron must be installed before the finished floor and wall
materials are installed.
No change in measurements if connected
with drain illustrated. (K-7161-AF)
Pump/Control Access
(If Apron Is Not Used)
20" (508 mm) W x
15" (381 mm) H
Integral
Flange Detail
Drop-in
Rim Detail
Recommended Faucet Area
1-1/4"
(32 mm)
18-1/2"
(470 mm)
3"
(76 mm)
20"
(508 mm)
8-11/16"
(221 mm)
1-11/16"
(43 mm)
60" (1524 mm)
3"
(76 mm)
2-7/8"
(73 mm)
1" (25 mm)
32" (813 mm)
16"
(406 mm)
Ø 1-1/2"
1-1/2"
(38 mm)
1/2" (13 mm)
R. Max
Product Diagram
HOURGLASS
®
32
HOURGLASS
®
32 BATH WHIRLPOOL WITH HEATER
Page2of2
1014688-4-
F