Dimensions Guide

1-1/2"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Drop-inInstallation:
EndDrain location:
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
48" x 24" (1219 mm x 610 mm)Basin area, bottom:
59" x 30" (1499 mm x 762 mm)Basin area, top:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
100 lbs (45.4 kg)Weight:
86 lbs/ft² (419.9 kg/m²)Minimum floor load:
14" (356 mm)Water depth:
67 gal (253.6 L)Water capacity:
Drop-in, 64" x 34" (1626 mm x 864 mm)Cutout:
Blower: 120 V, 10 A, 60 HzElectrical component
rating:
1-15/16" (49 mm)Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 08:56
Mariposa
®
5.5' BubbleMassage
™
Bath
K-1224-G