Dimensions Guide

*Recommended User
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 A, 50/60 HzAmplifier, Heated
Surface:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
3-Wall AlcoveInstallation:
RightDrain location:
51-3/8" x 21" (1305 mm x 533 mm)Basin area, bottom:
64-1/2" x 30-1/2" (1638 mm x 775 mm)Basin area, top:
96 lbs (43.5 kg)Weight:
44 lbs/ft² (214.8 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
72 gal (272.5 L)Water capacity:
Amplifier: 120 V, 50/60 Hz
Heated Surface: 120 V, 0.5 A, 50/60 Hz,
65 W
Electrical component
rating:
1-15/16" (49 mm)Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 08:59
Mariposa
®
6' VibrAcoustic
®
Bath
K-1224-VBRAW